About Advanced Autosports

New Items . . . Click on any image to go to that link

	The Spec Miata Constructors Manual Written by: David Wheeler What started out as a 20 page pamphlet turned into a 80+ page 88 color picture monster. It has been a labor of both love and hate. I've tried to include as many tips and secret information as I could. At $16.95 this could save you money and hours in the garage.
	Rear Filler Panel ~ New from Advanced Autosports is an aftermarket Rear Filler Panel. The plastic panel that goes between the tail lights on a 90-97 Miata. I have used several of these and found them to fit just like the more expensive factory piece. Regular Retail Price will be $199.95 we have an introductory price of $179.95 good through July 31, 2008. Available in gloss black only.
	AMB DisplayIt The ultimate laptimer is finally here! Everytime you come by start/finish, the DisplayIT feeds you the up-to-the-second official practice, qualifying and race information you need directly from the AMB timing system. OLD Price $499.99 ~ NEW Price $299.99 $200.00 difference
	Dash Plates Our new dash plate will fit all Miatas from 1990-2005. If you are planning on installing aftermarket gauges or a digital dash display, this plate will make your life easier. Made from non glare, textured black ABS plastic, you can easily drill this for your desired application.
	Radio Plates These come in 2 versions for 1990-97 model years and for 1999-2005 model years. Made from the same durable ABS plastic as our dash plates, you can mount additional gauges or switches to this panel. Or, just use it as a block off plate to give your racer that finished appearance.
	Rear Subframe Checker Tool This item is a huge time saver. This tool is welded in a jig and works on 1990-2005 Miata's. We learned the hard way that the rear suspension pick-up points tend to bend during wheel-to-wheel contact. Accurately measuring the pick-up points is almost impossible with the exhaust and diff in the way. Our new Subframe Checker will check this in a matter of seconds.
	Spec Miata Shock Hat Spacer This spacer is designed to fit all Spec Miata's utilizing the 1999 and newer upper shock mount. Set of 4
	Center Nets The Driver Center Nets were Engineered to be in the correct place to help control occupant movement and enhance your Safety System. Black only.
	CTEK Multi US 3300 Battery Charger The Multi US 3300 battery charger, the best-selling charger in Europe today. CTEK MULTI US 3300 is a strong multi-tasker that can handle all but the largest vehicles. Particularly well suited for automotive use, the MULTI US 3300 offers outstanding recharging performance.
	Allview Racers Mirror The patented and revolutionary Racers ALLVIEW Mirror is the #1 choice of professional auto racers including Nextel Cup, Busch and Craftsman Truck drivers. Constructed of durable and lightweight anti-UVA/VB ABS, is a seamless one-piece mirror with Advanced ALLVIEW^TM Optical Technology that offsets visual distortion while letting you see everything.
	A.C.T. Clutch Kits for Spec Miata Included in the kit is the legal pressure plate, 4 puck light weight disc un-sprung hub, new pilot bearing, new throw out bearing and clutch alignment tool. 1.6 Miata - Retail $412.00 Our Price $350.00 1.8 Miata - Retail $446.00 Our Price $395.00
	MSD Ignition Wire Set 8.5mm Super Conductor Universal Spark Plug Wire Set. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. MRSP $80.40 Our Price $66.95
	Spec Miata Vent Windows CNC cut from Lexan for exact fit and long life. The flip out AERO vents allow the vent to be closed on those cool days and they can be aimed for personal preference. These universal vents will fit either side and all models from 1990-1997. These windows are crystal clear they have a protective film on them as shown in the photo, which easily peels off.
	Oil Pressure Sender Relocation Kit This kit allows the relocation of the factory Oil Pressure Gauge Sender to the firewall. The proper metric pipe thread adapter screws into the engine block. The Billett aluminum sender manifold can accommodate up to 3 senders. Listed below for purchase.
	Spark Plug Spinner Handler This one piece, extra long Spark Plug Socket will reach down into the spark plug wells on Miata Engines. The built in "T" handle gives enough leverage for removing or installing the plugs. Yet it still retains a 3/8 drive ratchet end should you need it. Never again will you go fishing with needle nose pliers to retrieve the lost socket or plug.
	4mm Allen Driver This driver makes rear brake adjustment on your Miata a snap. No fumbling with a fold-up hex key set. No loosing the one size you need in the grass. A comfortable handle with red trim makes it easy to find.
	Coolant Gauge Adapter Small Specifically designed for Spec Miata's, this heater hose adapter will work for any car with 1-5/8" heater hose. This adapter features a 1/8" NPT threaded hole, allowing the use of most popular gauge senders. Shown with an "Autometer" water Temperature sender (not included).
	Coolant Gauge Adapter Large Specifically designed for Spec Miata's, this radiator hose adapter will work for any car with a 1-1/8" hose. This adapter features a 1/8" NPT port for electric senders on one side and a 1/2" NPT port for mechanical gauges on the other side. Plugs for both ports are included. Shown with "Autometer" mechanical Temperature gauge (not included).
	Clutch Line The Clutch Line replaces the rubber flex hose and the Steel "Curly Q" Line. It eliminates the need for the factory mounting brackets, that interfere with transmission and starter removal.
	Sample Fuel Port Complete with hose and 2 port fittings.
	Nickel Plated Antenna Plug Advanced Autosports now has a nickel plated steel plug that snaps right into the factory antenna hole and a nickel plated steel plug for the lighter hole. This nickel plated finish looks great just as it is. Or the plug may be painted to match the car if you desire. FREE Shipping!
	Throttle Pedal Extension This item is made from diamond plate aluminum. Designed to make heel-toe braking easier in a spec Miata. The plate can easily be trimmed for your personal liking. The mounting holes are predrilled to match the existing holes in the factory throttle pedal, no drilling required. The stainless steel hardware is included.
	Radiator Cap Miata 21 P.S.I. Radiator Cap